Login
clemtex homelink corner
Corrosion Control
Equipment and Supplies

Products » Automated/Engineered Equipment

Automated/Engineered Equipment

Description:

Here at Clemtex, we have a full engineering staff that can design for all your industrial equipment needs. From fully automated systems, to more operator interactive controls, we can do it all. We design with the customer in mind. See our engineering site for more information.


Automated Stator Pipe Internal Blasting Unit

Automated Stator Pipe Internal Blasting Unit

Application: The system shall grit blast the I.D. (internal diameter) of various sized stator pipes ranging from 1-3/4” to 12” internal diameter and from 3’ to 23’ in length. The blast should provide a deep anchor profile and white metal cleaning (SSPC-SP5). The system should align the pipe placed on an entrance rack and eject the pipe to an exit rack when completed.

More info...



Bundle I.D. Coating Lance System

Bundle I.D. Coating Lance System

Application: Coating the I.D. (internal diameter) of various sized pipes. From 3" to 12" diameter and from 10' to 40' in length.

More info...



ALPHA 1 Autonomous Blasting Robot

ALPHA 1 Autonomous Blasting Robot

The ALPHA 1 is the first blasting robot that does not need to be programmed.
It builds its own blasting plan by scanning its surroundings using an onboard 3D camera.

  1. Position
  2. Scan
  3. Blast

The ALPHA 1 brings with it exceptional value in three areas.

More info...



Bundle I.D. Blasting System

Bundle I.D. Blasting System

Application: The system blasts the I.D. of 2”-16” diameter pipe and a length up to 40’. The system may be setup to achieve all ranges of cleanliness. Hydraulic pipe lifters load and eject the pipe onto and off of the work station where the pipe is rotated and blasted.

More info...



Custom Automated Conveying Equipment

Custom Automated Conveying Equipment

Application: Customer required automatic mixing batches of various materials based on weight.  The percentage of material varied from batch to batch.  Operators were manually weighing material and adding to each batch.

More info...



Custom Blast Machine Controls

Custom Blast Machine Controls

Application: The end user was required to clean several thousand small tubes inside of their large heat exchangers. An operator would manually insert a blast nozzle into the end of the tube. It was required to blow down the pipe for 10 seconds to clear any loose debris, then open the abrasive valve for 20 seconds to begin the blast process and finish by blowing air only once more for 10 seconds to clear any abrasive or dust from the tube.

More info...



Custom Control/Automation Packages

Custom Control/Automation Packages

Have an automated system with old style push-button controls? We can help design and provide a state of the art touch-screen controls system.

More info...



Custom Low Pressure Conveying Equipment - Locomotive Engine Sand Box Loader

Custom Low Pressure Conveying Equipment - Locomotive Engine Sand Box Loader

Application: Customer required a process to load abrasive into a train engine traction box that require minimal labor and stain on the operator.

More info...



Portable I.D. Drive System

Portable I.D. Drive System

The system is designed to provide a constant drive speed to retract a 1-1/4” diameter pipe lance used for blasting or coating the internal diameter of pipe. The system will consist of a frame/assembly skid, drive system and control panel only. Standard 1-1/4” schedule 40 or schedule 80 pipe may be assembled to the desired length by the end user on site to meet the desired length.

More info...



Custom Plural Component Proportioning System

Custom Plural Component Proportioning System

Application: Spray a plural component coating at a the customer's desired mix ratio using no pumps or flowmeters. 

More info...



I.D. Blasting Unit, Rotating Lance

I.D. Blasting Unit, Rotating Lance

Application: A basic lance system designed to blast the interior of pipe from 5-12” I.D.

More info...



I.D. Stator Coating Unit

I.D. Stator Coating Unit

Coating the I.D. (internal diameter) of various sized stators/pipes. From 2" to 24" diameter and up to 30' in length. 

More info...



Rotor Blasting Unit

Rotor Blasting Unit

Application: De-scaling and providing a deep anchor profile to the OD (outer diameter) of various sized drilling rotors. From 2”-10” diameter and from 6’ to 30’ long.

More info...




©2017 Clemtex - Do not reproduce anything on this site without consent. Terms & Conditions. Conflict Materials Statement.