Clemco WETBLAST FLEX

Our all-in-one WETBLAST FLEX™ system gives you convenience you don’t get from traditional slurry systems. Its design and simplified set up and operation make for easier end-of-shift shutdown. By mixing the abrasive and water after it leaves the blast machine, you never have to empty a machine of a messy water/abrasive mix.

Flexible set up options allow you to position the water Flexible injector either at the base of the blast machine or at the nozzle – your choice. With the injector at the nozzle, you can adjust the water/abrasive mix at any time.

You can dry-blast with the FLEX, simply remove the injector adapter mounted at the base of the machine, and turn off air to the pump.

  • SKID MOUNTED—All in one convenient design with fork lift pockets and lifting eyes.
  • WATER SOURCE—Use the on board water tank or connect the system to a municipal water source
  • ABRASIVE CUT OFF SWITCH—With injector and ACS at the nozzle, you can control wash down and surface blow off without a trip to the blast machine.
  • NO POT TENDER NEEDED—With the injector adaptor and ACS mounted at the nozzle, there’s no need for a pot tender.

FLEX Base Unit

  • 6 ft³ Blast Machine with Pneumatic Remotes and 50 ft Control Line
  • 120 Gallon Water Tank
  • Wetblast InjectorTM Pump Module
  • Base-Mount Wetblast InjectorTM
  • Standard Wetblast InjectorTM with 50' Hose
  • Abrasive Cut-Off Switch
  • Blast Machine Screen & Cover
  • 1 ½" Pressure Regulator & Air Filter

FLEX Package

  • Base Unit (details above)
  • 50' Coupled Supa Hose
  • #8 Long-Venturi Nozzle
  • Apollo 600 HP DLX
  • Clem-Cool Air Conditioner
  • 50' Respirator Hose
  • CPF-20 (installed on skid)
  • Nominal Spares

Promotional Video

0 Products

Back

Sorry, we couldn´t find any products.