XM Plural Component Sprayers
Precise ratio assurance in a fully configurable system.
Engineered to handle the toughest protective coatings, the Graco XM Plural-Component Sprayer provides precise ratio control, allows users to download historical spraying data, and handles a wide range of two-component materials.
At the heart of the ratio control is Graco's advanced dosing technology. The major component is constantly flowing while the minor component is injected at higher pressures. Advanced sensing technology allows pumps to compensate for pressure fluctuations, resulting in accurate, on-ratio mixing for better yield and less waste.
Ideally suited for marine, bridge, rail and wind energy applications, the Graco XM is fully configurable for your specific coatings job. Start with a base unit. Then select the accessories you need. You get exactly what you need. No more. No less.
| XM Plural-Component Sprayers | |
|---|---|
| Mixed Ratio Range | 1:1-10:1 (in 0.1 increments) |
| Ratio Tolerance Range (before alarm) | +/- 5% |
| Minimum Flow Rate | 1 qt/min |
| Maximum Flow Rate | 3 gal/min |
| Fluid Viscosity Range | 200-20,000 cps (Heavier viscosities can be mixed using heat, circulation, and/or pressure feeding) |
| Fluid Filtration | 60 mesh, standard on pump outlets (filter assembly not included on some models), Alternative 30 mesh screens included |
| Air Inlet | 3/4 npt(f) |
| Fluid inlets without feed kits | 1 1/4 npt(m) |
| 50:1 Maximum Fluid Working Pressure of mixed material | 5200 psi |
| 70:1 Maximum Fluid Working Pressure of mixed material | 6300 psi |
| Maximum Fluid Temperature | 160° F |
| Air Supply Pressure Range | 50-150 psi |
| 50:1 Maximum pump air set pressure | 100 psi |
| 70:1 Maximum pump air set pressure | 90 psi |
| Maximum pump inlet fluid feed pressure | 250 psi |
| Maximum Air Consumption | 70 scfm per gpm (at 100 psi in scfm) |
| Air Filtration | 40 micron main filter, 5 micron control air filter |
| Ambient Operating Temperature Range | 32 to 130° F |
| Ambient Storage Temperature Range | 30 to160° F |
| Environmental Conditions Rating | Indoor/outdoor use, Altitude up to 4000 m, Maximum Relative humidity to 99% up to 130° F, Pollution Degree (11), Installation category (2) |
| Sound Pressure | 86 dBA at 100 psi |
| Sound Power | 98 dBA at 100 psi |
| Weight | Base sprayer (XM1A00 and XM5A00 models) 742 lb (add component weights to base sprayer weight for your specific model weight) |
| Wetted parts | |
| Suction Tubes | Aluminum |
| Flush Pump | Carbide, PTFE, stainless steel, UHMWPE |
| Hoses | Nylon |
| Pumps (A and B) | Carbon steel, alloy steel, 303, 440, 17-ph grades stainless steel, zinc and nickel plating, ductile iron, tungsten carbide, PTFE |
| Metering Valves | Carbon Steel, nickel plating, carbide, polyethylene, leather |
| Manifold | Carbon steel, nickel plating, carbide, 302 stainless steel, PTFE, UHMWPE |
| Mixer | Stainless steel housing with acetal elements |