Binks Conventional Style HC

  • Used to coat the inside diameter of 2" to 24" pipe.
  • Needs to be pressure fed from a pressure tank, pump or pressure cup.
  • 360 degree spray pattern
  • Forward angle, forward angle/forward spray, right angle or reverse angle tip (specify when ordering).
  • Fits through a 3/4" clearance hole.
  • Best suited for medium to heavy viscosity materials.
  • Long needle shuts material off at the tip.
  • Useable length of extension is approximately 1-1/2" shorter that extension length.

0 Products

Back

Sorry, we couldn´t find any products.