Binks Conventional Style C

• Used to coat the inside diameter of 2" to 24" pipe.
• Needs to be pressure fed from a pressure tank, pump or pressure cup.
• 360 degree spray pattern
• Forward angle, forward angle/forward spray, right angle or reverse angle tip (specify when ordering).
• Fits through a 3/4" clearance hole.
• Best suited for thin/medium to medium/heavy viscosity materials.
• Long needle shuts material off at the tip.
• Useable length of extension is approximately 1-1/2" shorter that extension length.

Other Information

• Longer lengths are available custom order
• Extensions can be purchased with or without the spray gun
• Most extensions can ship in 2 weeks or less

Available Literature