Binks Conventional Style HCVT

Binks Conventional Style HCVT

  • Used to coat the inside diameter of 3" to 24" pipe.
  • Needs to be pressure fed from a pressure tank, pump or pressure cup.
  • 360 degree spray pattern
  • Forward angle or right angle tip (specify when ordering).
  • Fits through a 1-1/8" clearance hole.
  • Best suited heavy viscosity materials.
  • Tungeston carbide nozzle assembly makes it suited for abrasive materials.
  • Long needle shuts material off at the tip.
  • Useable length of extension is approximately 1-1/2" shorter that extension length.

Binks Conventional Style HCVT